DEBEM, DEBEM diaphragm pumps, centrifugal pumps DEBEM, DEBEM drum pumps, dampers DEBEM DEBEM pneumatic diaphragm pumps, DEBEM automatically pulse damper, DEBEM diaphragm pulsation damper 

 General Machinery International Trading (Shanghai) Co., Ltd. Special Agent the Italian DEBEM pump diaphragm DEBEM, DEBEM centrifugal, DEBEM drum pumps, the DEBEM damper DEBEM pneumatic diaphragm pumps, DEBEM automatic pulse damper, DEBEM diaphragm pulsation damper, etc. and so on. 
 Italian company DEBEM products are widely used in chemical, textile, food, environment, leather, ceramics, electronics, paint and other industries. 
 DEBEM company specific products 
 DEBEM CUBIC series pneumatic diaphragm pumps: 
 The DEBEM company Midgetbox Series pneumatic diaphragm pump: diameter: G1 / 4 ¨ within the wire, the maximum flow rate: 5 l / min. 
 Use of compressed air driven conveying corrosive, high viscosity liquid, even in very wet or explosive 
 Harsh environment, but also to ensure maximum safety and reliability. 
 The application of high viscosity liquids, the maximum viscosity up 50000cps (temperature 20 ° C). 
 Even if the pump is not completely filled with fluid, has a higher ability to self-priming, and can reduce compressed air pressure, stroke frequency, fine-tuning of the pump will not cause any harm. 
 The main structure of the PP, Ke Yi liquid type, environmental conditions and temperature conditions to select the best internal material. 
 Comply with the ATEX rating. 
 The DEBEM company Cubic15 Series pneumatic diaphragm pump: diameters: G3 / 8 ¨ within the wire, the maximum flow rate: 17 l / min 
 The use of compressed air-driven transport corrosive, high viscosity liquids, even in very wet or explosive harsh environment, but also to ensure maximum safety and reliability. 
 The application of high viscosity liquids, the maximum viscosity of up to 50000cps (temperature 20 ° C), allowing a small amount of suspended particles. 
 Even if the pump is not completely filled with fluid, has a higher ability to self-priming, and can reduce compressed air pressure, stroke frequency, fine-tuning of the pump will not cause any harm. 
 The main structure of the optional PP, ECTFE, and other material, according to the liquid types, environmental conditions and temperature conditions to select the best internal material. 
 Comply with the ATEX explosion-proof rating 
 DEBEM company BOXER series pneumatic diaphragm pump: 
 B81PDTAPDXC, MICR, MIN, B81, B50, B80, B100, B150, B250, B251, B502, B503 series. 
 Pipe diameter: G1 / 2 ¨ wire ranging from a maximum flow rate: 30 l / min 
 The use of compressed air-driven transport corrosive, high viscosity liquids, even in very wet or explosive harsh environment, but also to ensure maximum safety and reliability. 
 The application of high viscosity liquids, the maximum viscosity of up to 50000cps (temperature 20 ° C), allowing a small amount of suspended particles. 
 Even if the pump is not completely filled with fluid, has a higher ability to self-priming, and can reduce compressed air pressure, stroke frequency, fine-tuning of the pump will not cause any harm. 
 The main structure of the optional PP, PVDF, aluminum, 316 stainless steel and other materials, according to the liquid types, environmental conditions and temperature conditions to select the best internal material. 
 Comply with the ATEX explosion-proof rating 
 DEBEM company Equaflux Series automatic pulse damper: 
 EQ100PHTC, Equaflux51, Equaflux100, Equaflux200, Equaflux302, Equaflux303 series. Interface: G3 / 4 ¨ within the wire, the maximum supply pressure: 7Bar 
 Diaphragm pulsation damper. 
 The use of compressed air-driven, installed in the pump output pipe can effectively reduce water hammer and reduce the vibration in order to achieve the online protection of the equipment. 
 The application of high viscosity liquids, the maximum viscosity of up to 50000cps (temperature 20 ° C), allowing a small amount of suspended particles. 
 Automatically adjust to meet the system conditions, with no manual adjustment or correction. 
 The main structure of the optional PP, PVDF, PPS,-V material, and in accordance with the liquid type, environmental conditions and temperature conditions to select the best internal material. 
 Comply with the ATEX rating. 
 DEBEM MB series horizontal centrifugal pumps: 
 MB80PTLVN, MB80, MB100, MB110, MB120, MB130, MB140, MB150, MB155, MB160, MB180 series. 
 Maximum flow rate: 6 m3 / h ranging from 
 Motor drive (maximum speed of 2900rpm), for large and rapid corrosive fluid transfer. 
 The special open-rotor structure, transport dirty, viscosity up to 500cps (temperature 20 ° C) and contains small suspended particles in the liquid. 
 Offers two different internal mechanical seals: 
 (1) TL Type - Standard seal (lip seal) 
 Polymer ceramic material bushing. 
 (2) TS type - enhanced seal (fold-shaped seal) 
 PTFE materials, leakage and better applicable 
 Protection require a higher, poor water quality of the liquid. 
 Pump optional PP, PVDF and other materials, according to the liquid types, environmental conditions and temperature conditions to select the best internal sealing material. 
 Can replace the explosion-proof motor 
 DEBEM IM series vertical centrifugal pump: 
 IM95PV0800N IM80, IM90, IM95, IM110, IM120, IM130, IM140, IM150, IM155, IM160, IM180 series. 
 Maximum flow rate: 6 m3 / h range 
 Vertical installation. 
 Using the motor drive (maximum speed of 2900rpm). 
 Transfer tube can be directly immersed in the chemical tank, a large number of the delivery of the highly corrosive liquid. 
 Internal mechanical seals specially designed to ensure that the leak occurred, the liquid can still flow to the tank. 
 The special open-rotor structure, transport dirty, viscosity up to 500cps (temperature 20 ° C) and contains small suspended particles in the liquid. 
 The main structure of the optional PP, PVDF and other materials, according to the liquid types, environmental conditions and temperature conditions to select the best internal material. 
 DEBEM TR series drum pumps the: TRP1200EL, the TR-EL TR-the PN series. 
 Maximum flow rate: 80,90 l / min range transport pipe material: PP, PVDF, stainless steel, 
 Motor drive (motor). 
 The drive unit is mounted above the duct fittings, easy drugs bucket of corrosive liquid fast delivery. 
 Pipeline directly into the drug barrel, internal mechanical seals specially designed to ensure that the spill occurred, the liquid can flow to the tank. 
 Has a special open-rotor structure, normal transportation clean, viscosity up to 900cps (temperature 20 ° C) of liquid. 
 Includes safety switch can prevent the pump an accident when a sudden power failure and then restart. 
 Pipeline optional PP, PVDF, stainless steel and other materials, according to the liquid types, environmental conditions and temperature conditions to select the best internal material. 
 Another refueling guns, flow meters and other accessories available to purchase.